Fluke i30s AC/DC Current Clamp

Model No :

Key Features

Current clamp based on Hall Effect technology that measures both DC and AC current
Includes a BNC connector for compatibility with oscilloscopes
Current range: 30 mA to 30 A DC, 30 mA to 20 A AC rms
Frequency range: DC to 100 kHz (-0.5 dB)
CAT III 300 V safety rating

Call Us Now

Fluke i30s AC/DC Current Clamp
The i30s current clamp is based on Hall Effect technology for use in measurement of both DC and AC current. The i30s may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.

Electrical specifications
Specified current range	30 mA to 30 A DC, 30 mA to 20 A AC rms
Usable current range	5 mA to 30 A DC, 30 mA to 20 A AC rms
Crest factor	1.4 in
Output sensitivity	100 mV/A
Accuracy (at +25°C)	DC ±1 % of reading ±2 mA AC ± 0.5 dB of reading ±2 mA
Resolution	±1 mA
Load impedance	> 100 kΩ
Conductor position sensitivity	±1% relative to center reading
Frequency range	DC to 100 kHz (-0.5 dB)
Phase shift below 1 kHz	< 2°
Temperature coefficient	±0.01% of reading / °C
Power supply	9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator
Working voltage (see Safety Standards section)	300 V AC rms or DC
General Specifications
Maximum conductor size	19 mm diameter
Output connection	Safety BNC connector, supplied with safety 4 mm adapter
Output zero	Manual adjust via thumbwheel
Cable length	2 m
Operating temperature range	0°C to +50°C
Storage temperature range (with battery removed)	-20°C to +85°C
Operating humidity	15% to 85% (non-condensing)
Weight	250 g
Safety	IEC 61010-1, Pollution Degree 2
	IEC 61010-2- 032: CAT III 300V
	Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc andfrequencies below 1 kHz.
EMC Compatibility	IEC 61326-1: Portable Electromagnetic Environment