TS® 22 Series Test Sets
Key Features
Combining reliability, durability, and expanded utility
The TS®22 Series Test Sets top features include:
- Tone (DTMF) and pulse operation
- Last number redial
- DTMF signal levels compensated for loop length
- DropSafe™ unit up to 20 feet
- Audible electronic ringer
- Locking mute switch
- 3-year redial storage time
- Over voltage and over current protection
- PBX pause button
- Field replaceable belt clip
- Continuous polarity LED indications
- For use with computerized voice response systems
- Stores nine 18-digit numbers in repertory dialer (speed dialing)
- RainSafe™ ruggedness for use in extreme weather conditions
- TS22A includes the above and an additional high-impedance monitor for DataSafe™ operation and a two-way speakerphone
The TS22 Test Set’s unique built-in one-way amplified speaker provides three audio levels for hands-free listening and use with automated voice response systems. Multiple memories enable storage of nine 18-digit telephone numbers in a repertory dialer (speed dialing) for easy access to test boards, the central office, and other frequently called numbers. The last number redial feature eliminates the need to re-key your last entry. The TS22 Test Set offers an unbeatable combination of reliability, durability, and expanded utility.
The TS22A Test Set is equipped with all the features of the TS22 Test Set with the addition of a built-in two-way speakerphone. The two-way speakerphone enables the user to operate hands-free. The effect of ambient noise can be eliminated with the Mute switch, allowing the technician to monitor a line uninterrupted while in Talk mode. A standard among field professionals, the TS22A model is a reliable and durable test set that is ready for any job.
* The TS22 Series Test Set contains an embedded 3-volt lithium battery. The 9-volt battery in the Test Set should be changed when low, or once a year if not in use, to prevent the 3-volt battery from draining. A 3-volt battery that drains after its 42-month warranty will need to be replaced by an authorized service facility at a charge to you.
* Note also that your speakerphone will no longer work when your 9-volt battery is low or dead. You should replace the 9-volt battery whenever it is low.
Electrical | |
Loop Limit | 2 kΩ maximum at 48 VDC (nominal 20 mA minimum loop current) |
DC Resistance (Talk Mode) | 300 Ω typical |
Monitor Impedance | |
TS22 | 5 kΩ nominal at 1 kHz |
TS22A | 120 kΩ nominal at 1 kHz |
Rotary Dial Output | |
Pulsing Rate | 10 pps ±5 pps |
Percent Break | 61 % ± 2 % |
Interdigit Interval | 1000 ms typical |
Leakage During Break | >50 kΩ |
DTMF Output | |
Tone | ±1% maximum |
Frequency Error Tone Level | -3 dBm combined (typical) |
High versus Low Tone Difference | 4 dB maximum |
Monitor Amplifier | 9 V battery; provides 25 hours |
Power Source | continuous use, typical |
Speaker Levels for TS22 | Low, medium, high and off |
Automatic Power Shut Off | After 5 min. of no audio signal |
Speakerphone Levels TS22A | Low, medium, high and off |
Power Source | Shared line and battery power |
Physical | |
Physical Measurement | 10.25 in x 2.69 in x 3.38 in (26 cm x 6.83 cm x 8.57 cm) |
Weight | |
TS22 | 21 ounces (.595 kg) |
TS22A | 22 ounces (.624 kg) typical |
Environmental | |
Temperature Operating: | 29 °F to 140 °F (-34 °C to 60 °C) |
Storage | -40 °F to 150 °F (-40°C to 66 °C) |
Altitude | To 10,000 feet (3,000 meters) |
Relative Humidity | 5 % to 95 % |
* The TS22 Series Test Set contains an embedded 3-volt lithium battery. The 9-volt battery in the Test Set should be changed when low, or once a year if not in use, to prevent the 3-volt battery from draining. A 3-volt battery that drains after its 42-month warranty will need to be replaced by an authorized service facility at a charge to you.
* The TS22 Series Test Set contains an embedded 3-volt lithium battery. The 9-volt battery in the Test Set should be changed when low, or once a year if not in use, to prevent the 3-volt battery from draining. A 3-volt battery that drains after its 42-month warranty will need to be replaced by an authorized service facility at a charge to you.
* Note also that your speakerphone will no longer work when your 9-volt battery is low or dead. You should replace the 9-volt battery whenever it is low.
22800004 | TS22 test set with 346A plug |
22800009 | TS22 test set with ABN |
22801001 | TS22A test set with piercing pin clips |
22801004 | TS22A test set with 346A plug |
22801009 | TS22A test set with ABN |